Preparation
For assistance, please visit http://www.panasonic.com/phonehelp 15
Setting up the handset
Battery installation/replacement
1 Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
L If necessary, remove the old battery.
2 Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover (C, D).
Important:
L Use only the rechargeable Panasonic
battery noted on page 10.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to
recycle this battery.
Battery charge
Place the handset on the base unit for 7
hours before initial use.
While charging, the charge indicator on the
handset lights in amber. When the battery
is fully charged, the indicator lights in
green.
L Model shown is KX-TG5761/KX-
TG5767.
Note:
L If you want to use the handset
immediately, charge the battery for at
least 15 minutes.
L To ensure that the battery charges
properly, clean the charge contacts of
the handset and base unit with a soft,
dry cloth once a month. Clean more
often if the unit is subject to the exposure
of grease, dust, or high humidity.
A
B
C
D
TG5761_5766_5767.book Page 15 Thursday, April 13, 2006 6:01 PM
To Next Page
Loading...
