Panasonic KX-TG5761S - Changing Handset Name

Programming
For assistance, please visit http://www.panasonic.com/phonehelp 49
Erasing a melody
1 {MENU} (middle soft key) i
{#}{1}{6}{6}
2 “List” i {SELECT}
3 Select the desired item. i {MENU}
4 “Erase” i {SELECT}
5 “Yes” i {SELECT} i {OFF}
Note:
L If the erased melody was used for the
handset ringer tone (page 47), “Tone 1”
(default) is used instead of that melody.
L If the erased melody was assigned to
certain callers as ringer ID (page 37), the
ringer ID assignment is canceled, and
the handset ringer tone (page 47) is
used instead of that song.
Changing handset name
Each handset can be given a customized
name (“Bob”, “Kitchen”, etc.), this is useful
when you make intercom calls between
handsets. The default setting is “Handset
1” to “Handset 8”.
You can also select whether or not the
handset name is displayed in standby
mode. The default setting is “Off”.
1 {MENU} (middle soft key) i
{#}{1}{0}{4}
2 Enter the desired name (max. 10
characters; page 31).
L If not required, go to step 3.
3 {OK}
4 Select the desired setting. i {SAVE}
i {OFF}
Handset
Handset
TG5761_5766_5767.book Page 49 Thursday, April 13, 2006 6:01 PM