To Next PageTo Next PageWhy my Panasonic KX-TG6811BX Cordless Telephone does not emit the specified number of rings?
If the Panasonic Cordless Telephone does not emit the specified number of rings, the number of rings decreases by 1 from the specified number of rings if the first ring is turned off.
What does 'Out of Range' mean on my Panasonic Cordless Telephone?
If 'Out of Range' is displayed on your Panasonic Cordless Telephone, the handset is too far from the base unit, so move closer. Ensure the base unit’s AC adapter is properly connected. Also, the handset may not be registered to the base unit, so register it. Activating one touch eco mode reduces the range of the base unit in standby mode, so turn eco mode off if required.
Why is caller information not displayed on my Panasonic KX-TG6811BX Cordless Telephone?
If caller information is not displayed on your Panasonic Cordless Telephone, you may need to subscribe to a Caller ID service. Ensure that the unit is plugged directly into the wall jack without any additional telephone equipment. If you use a DSL/ADSL service, connect a DSL/ADSL filter between the base unit and the telephone line jack. Also, other telephone equipment may be interfering with the unit, so disconnect it and try again.
Why I cannot make a call on my Panasonic Cordless Telephone?
If you cannot make a call on your Panasonic Cordless Telephone, the dialing mode may be set incorrectly, so change the setting. You may have dialed a call restricted number, or the key lock feature may be turned on, so turn it off.
Why is caller information slow to display on my Panasonic KX-TG6811BX Cordless Telephone?
If caller information is slow to display on your Panasonic Cordless Telephone, the unit may display the caller’s information at the 2nd ring or later, depending on your service provider. Try setting the first ring to “Off”. Also, try moving closer to the base unit.
Why I cannot operate the answering system on my Panasonic Cordless Telephone remotely?
If you cannot operate the answering system on your Panasonic Cordless Telephone remotely, the remote access code may not be set, so set it. You may be entering the wrong remote access code, so check your current code in the remote access code setting. The answering system may be turned off, so turn it on.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG6811BX |
| Category | Cordless Telephone |
| Language | English |
