To Next PageTo Next PageWhy has the time shifted on my Panasonic KX-TG6811E Telephone?
If the time on your Panasonic Telephone has shifted, it is likely due to incorrect time information from incoming Caller ID changing the time. Set the time adjustment to 'Manual' (off).
How to fix caller ID not showing on Panasonic KX-TG6811E?
If caller information is not displayed on your Panasonic Telephone, make sure that you subscribe to a Caller ID service. Also, if your unit is connected to any additional telephone equipment, remove it and plug the unit directly into the wall jack. If you use a DSL/ADSL service, consider connecting a DSL/ADSL filter between the base unit and the telephone line jack. Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again.
Why is caller information slow to display on my Panasonic KX-TG6811E Telephone?
Caller information may be slow to display on your Panasonic Telephone because, depending on your service provider/telephone company, the unit may display the caller’s information at the 2nd ring or later. Set the first ring to 'Off'. Also, try moving closer to the base unit.
Why doesn't the base unit of my Panasonic KX-TG6811E Telephone ring?
If the base unit of your Panasonic Telephone does not ring, the ringer volume may be turned off. Adjust the ringer volume.
Why my Panasonic Cordless Telephone does not work?
If your Panasonic Cordless Telephone is not working, ensure the batteries are installed correctly. Fully charge the batteries. Check all connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect it and try again. The handset might not be registered to the base unit, so register the handset.
What to do if Panasonic Cordless Telephone handset does not turn on?
If your Panasonic Cordless Telephone handset doesn't turn on, even with charged batteries, try these steps: Place the handset on the base unit or charger. Ensure the batteries are correctly installed. Unplug the base unit’s AC adaptor to reset the unit and turn off the handset, then reconnect the adaptor and try again. Also, the handset may not be registered to the base unit; in this case you should register it.
Why is my Panasonic Telephone not recording new messages?
If your Panasonic Telephone is not recording new messages, ensure that the answering system is turned on. If the message memory is full, erase unwanted messages. Check if the recording time is set to 'Greeting Only' and change the setting if needed. If you subscribe to a voice mail service, messages are recorded by your service provider/telephone company, not your telephone. Change the unit’s number of rings setting or contact your service provider/telephone company.
Why I cannot make a call from my Panasonic KX-TG6811E?
If you cannot make a call on your Panasonic Telephone, you may have dialled a call restricted number. Also, verify that the key lock feature is turned off.
Why is my Panasonic Telephone base unit beeping?
If the base unit of your Panasonic Telephone is beeping, it indicates that new messages have been recorded. Listen to the new messages.
Why can't I hear a dial tone on my Panasonic Telephone?
If you cannot hear a dial tone on your Panasonic Telephone, ensure that you are using the supplied telephone line cord, as your old cord may have a different wiring configuration. Check that the base unit’s AC adaptor or telephone line cord is connected properly. To further diagnose the issue, disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, the unit may need repair. If the working telephone does not operate properly, contact your service provider/telephone company.
General| GAP compatible | Yes |
|---|---|
| Number of Handsets | 1 |
| Display colours | Monochrome |
| Backlit LCD | Yes |
| Caller ID | Yes |
| Talk time | 15 hours |
| Battery type | AAA Ni-MH |
| Frequency | 1.9 GHz |
| Range | 300 meters outdoors, 50 meters indoors |
| Call Waiting | Yes |
| Handset Speakerphone | Yes |
| Intercom | Yes |
| Answering Machine | No |
| Weight (Handset) | 120 g |
| DECT | Yes |
| Type | Cordless |
| Multiple handsets capability | Yes |
| Display | Yes |
Details the different models and their components, including base units and handsets.
Lists the supplied accessories for various models, such as AC adaptors and batteries.
Provides essential details about the product's design, compliance, and usage.
Crucial guidelines to prevent injury and ensure safe product operation.
Advice on safe placement and installation to prevent hazards.
Guidelines for handling, charging, and types of batteries to use.
Tips on placement and environmental factors for optimal operation.
Step-by-step guide for initial product setup and connections.
Identifies and explains the buttons and functions on the handset and base unit.
Explains the icons and indicators shown on the handset and base unit displays.
Covers setting language, date, and time for the device.
Explains the function and usage of the dedicated NR key.
Procedures for initiating phone calls using the handset.
How to receive and respond to incoming calls.
Explains additional call management functions like Hold, Mute, and Recall/Flash.
Locking the handset to prevent unauthorized use or accidental changes.
Managing contact information accessible by all registered handsets.
How to add new contacts to the phonebook with names and numbers.
Assigning phone numbers to quick dial keys for fast access.
Configuring speed dial entries by entering numbers or selecting from phonebook.
Customizing unit features via menus or direct command codes.
Accessing advanced feature configuration like alarms and night mode.
Setting up alarms with customizable times, memos, and tones.
Managing ring behavior during specific hours to avoid disturbances.
Adding new handsets or accessories to the base unit.
Basic Caller ID functionality and requirements, including service subscription.
Viewing a history of incoming calls with caller information.
Accessing call history and redialing numbers directly from the list.
Overview of the unit's automated call answering and message recording functions.
Managing the answering service by enabling or disabling it.
Personalizing greetings played to callers.
Accessing recorded messages via the base unit controls.
Accessing recorded messages via the handset.
Controlling the answering system remotely from an external phone.
Configuring various operational parameters like ring count and recording time.
Explanation of the voice mail service provided by telephone companies.
Making calls between internal handsets for communication.
Finding misplaced handsets by paging them from the base unit.
Managing external calls, including transferring and holding conference calls.
How to input text and numbers using the dial keys and character modes.
Understanding common device error displays and their solutions.
Solutions for common problems encountered with the unit's operation.
Details of the product's warranty terms, coverage, and exclusions.
