To Next PageTo Next PageWhy can't I have a conversation using a headset on Panasonic KX-TG7622B?
If you cannot have a conversation using the headset on your Panasonic Telephone, your Bluetooth headset is not registered; register it. You can also turn your headset off, then turn it on and try again.
Why is my Panasonic KX-TG7622B Telephone handset beeping and flashing?
If your Panasonic Telephone handset is beeping and/or flashing, it likely indicates that the battery charge is low. Fully charge the batteries to resolve this issue.
Why I cannot make a call using the landline on my Panasonic KX-TG7622B Telephone?
If you cannot make a call using the landline on your Panasonic Telephone, the dialing mode may be set incorrectly; change the setting. Ensure the handset is not too far from the base unit; move closer and try again. Also, check if the cellular line only mode is turned on; if so, turn it off.
Why is my Panasonic Telephone not recording new messages?
If your Panasonic Telephone does not record new messages, the answering system may be turned off; turn it on. The answering system does not answer or record calls from cellular lines. The message memory may be full; erase unnecessary messages. The recording time may be set to “Greeting only”; change the setting. If you subscribe to a voice mail service, messages are recorded by your service provider/telephone company, not your telephone. The answering system will not answer incoming calls while the base unit or 2 or more handsets are on a cellular call or an intercom call or a headset is in use.
What to do if Panasonic KX-TG7622B battery still flashes after charging?
If your Panasonic Telephone battery still flashes, displays '–', or has a shorter operating time even after a full charge, clean the battery ends and the charge contacts with a dry cloth and charge again. If the problem persists, it may be time to replace the batteries.
Why is caller information not announced on my Panasonic Telephone?
If caller information is not announced on your Panasonic Telephone, ensure that the handset or base unit’s ringer volume is adjusted. If one handset is selected to ring for cellular calls, other units do not announce caller information. Check if the Talking Caller ID feature is turned on. Ensure the ring as cell mode is not set to “On (without Talking CID)”. Also, the number of rings for the answering system should not be set to “2 rings” or “Toll saver”.
Why I cannot switch cellular calls from Panasonic KX-TG7622B to the cellular phone?
If you cannot switch cellular calls from the unit to the cellular phone, your cellular phone may not support this feature.
Why is caller information displayed late on my Panasonic KX-TG7622B?
If caller information is displayed or announced late on your Panasonic Telephone, the unit may display or announce the caller’s information at the 2nd ring or later, depending on your service provider/telephone company. You can also move closer to the base unit.
Why can't I hear a dial tone on my Panasonic KX-TG7622B?
If you cannot hear a dial tone on your Panasonic Telephone, verify that the base unit’s AC adapter is properly connected and that the telephone line cord is also correctly connected. Ensure that the CELL 1 or CELL 2 indicator lights green. If these steps don't resolve the issue, disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/ telephone company.
Why can't I register a handset to my Panasonic KX-TG7622B Telephone base unit?
If you cannot register a handset to your Panasonic Telephone base unit, the maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit.
General| Type | DECT telephone |
|---|---|
| Intercom | Yes |
| Answering machine | No |
| Languages support | ENG, ESP |
| Phonebook capacity | - entries |
| User memory phonebook | 16 |
| Backlight color | Amber |
| Display resolution | 103 x 65 pixels |
| Display number of lines | 1 lines |
| Display size (HxV) (imperial) | 1.8 x 1.8 \ |
| Frequency band | 1.9 GHz |
| Channels quantity | 60 channels |
| Mounting type | Desk |
| Product color | Black |
Weight and Dimensions| Base weight | 226 g |
|---|---|
| Handset weight | 131 g |
| Base dimensions | 157 x 96 x 86 mm |
| Handset dimensions (WxDxH) | 48 x 27 x 160 mm |
Explains how to expand the system with Bluetooth cellular phones and headsets.
Provides critical warnings and precautions for safe operation of the product.
Details safeguards against misuse, liquid damage, and disassembly.
Lists basic safety precautions for product usage near water and during electrical storms.
Lists technical specifications including DECT, Bluetooth, frequency range, power, and operating conditions.
Guides on connecting the base unit, telephone line, and charger.
Instructions for installing rechargeable Ni-MH batteries correctly.
Identifies and explains buttons and indicators on the handset.
Details buttons, keys, and indicators on the base unit.
Instructions for setting date and time, display language, and voice guidance language.
Details the charging process and indicators for the handset batteries.
Explains the benefits and important considerations of the Link to Cell feature.
Options for selecting which unit receives cellular calls and ring as cell mode.
Step-by-step guide for registering a cellular phone to the base unit.
How to choose which handset or base unit rings for cellular calls.
How to change the default Bluetooth PIN for security.
How to make calls during a power failure, with single or multiple handsets.
How to answer calls during a power failure with one or multiple handsets.
How to transfer calls between the handset and a paired cellular phone.
Allows making/receiving landline calls during a power failure using a charged handset.
Steps to make cellular calls using the base unit.
How to answer calls on the base unit, including cellular and landline.
Moving a cellular call between the base unit and a paired cellular phone.
Steps to make landline calls using the base unit.
Steps to handle a cellular call while on a landline call.
Steps to handle a landline call while on a cellular call.
Step-by-step guide to adding entries to the shared phonebook via handset.
How to modify existing phonebook entries on the handset.
Procedures for finding and calling entries via cellular or landline.
Overview of how to customize unit features via menus or direct codes.
Settings for Link to Cell, phonebook transfer, and headset management.
Settings for ringer volume, tone, interrupt tone, silent mode, and date/time.
Covers alarm settings and silent mode configuration.
Options for adding devices, setting ringer volume/tone, and selecting ring units.
How to set, configure, and manage alarm functions.
Operating procedures for adding new units like handsets.
Steps to register a handset to the base unit if it's not pre-registered.
Settings for power back-up operation.
Explains the requirement for subscribing to Caller ID service.
How to view the caller list and call back using the landline.
How to save caller information to the phonebook using the base unit.
Describes how caller name and number are displayed for incoming calls.
Important note on accessing the caller list and correct date/time settings.
How to view the list of incoming calls and call back from it.
Feature that audibly announces caller information.
Guide to copying contacts from a mobile phone to the unit's phonebook.
How to use a Bluetooth headset for hands-free landline conversations.
Steps for pairing a Bluetooth headset with the base unit.
Configuration options for the answering system.
How to enable or disable the answering system on the base unit and handset.
Step-by-step guide to record a personalized greeting.
Accessing answering system functions remotely via phone.
How to turn on the answering system remotely.
How to listen to new and all messages via the handset.
Setting and importance of the remote access code for security.
How to listen to new and old messages via the base unit.
How to store the voice mail access number for automatic dialing.
How to listen to voice mail messages using the handset or base unit.
How to make intercom calls between handsets or base unit.
Step-by-step guide to initiate an intercom call.
Additional error messages and their troubleshooting steps.
Troubleshooting for ringing issues, cellular calls, landline calls, and long distance calls.
Troubleshooting for operating the answering system, including remote operation and PIN issues.
Spanish quick start guide for base unit and handset installation.
How to connect/disconnect cellular phones and set cellular-only mode.
Using a Bluetooth headset for landline calls, registration, and switching.
Addresses more common user questions regarding battery charging and call waiting.
Detailed steps for pairing a cellular phone with Bluetooth.
Detailed steps for transferring phonebook data via Bluetooth.
