29
KX-TG7622B/KX-TG7623B/KX-TGA410B
Frequently Used Items (Base Unit)
ex.)
Note:
(*1) When you enter the address or New Data, please refer to the table below.
Items Address Default Data New Data Remarks
Frequency 00 07 / 00 08 70/02 - - Use these items in a READ-ONLY mode to
confirm the contents. Careless rewriting may
cause serious damage to the computer system.
ID 00 02 ~ 00 06 Given value - -
Desired Number (hex) Input Keys Desired Number (hex) Input Keys
0 0 A [Flash] + 0
1 1 B [Flash] + 1
. . C [Flash] + 2
. . D [Flash] + 3
. . E [Flash] + 4
9 9 F [Flash] + 5
7). Press , a long confirmation beep
will be heard.
8).
Press to return to standby mode.
After that, turn the base unit power off and then power on.
New Dat
BACK
CLEAR
_ _ _ _ _ _
Set Addr.:
Set Addr.:
M
M
{OFF}
* "Set tel line" isn't appeared at Cell line only mode.
To back normal mode, execute the following procedure:
1 {MENU} i {#}{1}{5}{7}
2 {V}/{^}: Select "off "i {SELECT}
3 {OFF}
Note: * To enter "Set dial mode", press
or
{>} at " Set tel line".
It is necessary to turn on the power of base unit.
SELECT
To Next Page
Loading...
