Panasonic KX-TG7622B - Page 45

45
KX-TG7622B/KX-TG7623B/KX-TGA410B
10.1.7. Registering a Handset to the Base Unit
10.1.8. Deregistering a Handset
L
L
L
L
The supplied handset and base unit arepre-registered. If for some reason the
handset is not registered to the baseunit, re-register the handset.
1 Handset:
2 Base unit:
Press and hold MLOCATORN forabout 5 seconds until theregistration tone
sounds.
If all registered handsets startringing, press {LOCATOR} againto stop, then
repeat this step.
The next step must be completedwithin 90 seconds.
3 Handset:
Press {OK}, then wait until a longbeep sounds.
Note:
While registering, “Base in registering” is displayed on allregistered
handsets.
When you purchase an additionalhandset, refer to the additionalhandset’s
installation manual forregistration.
{MENU} i # 1 3 0
L
A handset can cancel its ownregistration to the base unit, or otherhandsets
registered to the same baseunit. This allows the handset to end itswireless
connection with the system.
1
All handsets registered to thebase unit are displayed.
2 : Select the handset you want tocancel. i {SELECT}
3 : “Yes” i {SELECT}
4 {OFF}
{ }
{MENU} i # 1 3 1
{ }