Panasonic KX-TG7731S - 8.1.2. Handset

30
KX-TG7731S/KX-TG7732S/KX-TG7733S/KX-TGA470S
8.1.2. Handset
Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
H/S key operation H/S LCD
1). Press .
2). Select "Initial Setting" using or
then press or
{>}.
{^} {V}
3). Enter "7", "2", "6", "2", "7", "6", "6", "4".
Note: 7262 7664 = PANA SONI
(see letters printed on dial keys)
5). Enter "
٨ ", " ٨ ", " ٨ ", " ٨ " (Address). (*1)
7). Press , a long confirmation beep
will be heard.
8).
Press to return to standby mode.
After that, remove and reinsert the batteries. Press the Power button for
about 1 second if the power is not turned on.
6). Enter "
㧖 ", " 㧖 " (New Data). (*1)
4). Select "Write EEP" using or
then press or
{>}.
{^} {V}
{OFF}
Default Data
New Data
M
Caller List
^
V
^
V
Initial setting
^
V
Service Mode
Read EEP
Write EEP
Set Addr.:
_ _ _ _ _ _
Set Addr.:
Set Addr.:
Ringer setting
M
INT
INT
BACK
BACK
BACK
CLEAR
M
CLEAR
SELECT
PLAY
SELECT
SELECT
SELECT
SELECT
SELECT
PLAY
{OFF}
{FLASH}
{CALL WAIT}
Dial keypad
{OFF}
{FLASH}
{CALL WAIT}
Dial keypad
Naviga
(Volume) key
tor key/
?
Soft keys