– 9 –
Using a Bluetooth wireless headset (optional) for landline calls
By registering a Bluetooth headset to the base unit, you can have a hands-free conversation
wirelessly for landline calls.
L While someone is using a cellular line, the Bluetooth headset connection is not available.
Registering a headset to the base unit
1 Your headset:
Set your headset to registration mode.
L Refer to your headset operating instructions.
2 Handset:
{MENU} (621
3 Enter your headset PIN.
L Typically, default PIN is “0000”. Refer to the headset operating instructions.
4 Press {OK}, then wait until a long beep sounds. s {OFF}
L When the HEADSET indicator on the base unit lights green, you are ready to use the
headset.
Operating a Bluetooth wireless headset using a landline
Refer to your headset operating instructions for headset operations.
N Answering landline calls with your headset
To answer a landline call, turn on your headset referring to your headset operating instructions.
When you finish talking, turn off your headset referring to your headset operating instructions.
L If you cannot hang up the call using your headset;
− press {} (STOP) on the base unit. (KX-TG7731 series)
− press {SP-PHONE} on the base unit 2 times. (KX-TG7741 series)
N Switching between the base unit and your headset
You can switch between the base unit and your headset:
− during a landline call with the base unit speakerphone. (KX-TG7741 series)
− during an intercom call between the base unit and handset. (KX-TG7741 series)
− while listening to messages recorded on the base unit answering system.
*1
KX-TG7741 series
To switch to your headset:
Press {HEADSET} on the base unit.
To switch to the base unit:
Press {SP-PHONE} on the base unit.
*1 KX-TG7731 series
L You can only switch from the base unit to your headset. Turn on the headset referring to your
headset operating instructions.
Using Bluetooth devices
Registration
To register to use the handset.
TG77xx_(en)_QG.fm Page 9 Tuesday, November 22, 2011 9:34 AM
To Next Page
Loading...
