Panasonic KX-TG9581 - Page 8

– 8 –
Call from Outlook
®
(Telephone Plug-in)
By installing the “Telephone Plug-in” software for Microsoft
®
Office Outlook
®
found on the supplied CD-
ROM and connecting the base unit and your computer with the mini USB cable, the following features are
available:
− You can make/answer landline or cellular calls from the “Telephone Plug-in” of Microsoft Office Outlook
through the base unit.
− Caller information is shown in a pop-up window on your computer display when a call is received.
Making calls from Outlook
N For Microsoft Office Outlook 2010/2013 users
Making a call from the
Microsoft Outlook 2010/2013
contact list
1 Find and open the desired contact.
2 Click [Phone numbersV].
3 Click the phone number you want to call.
4 Using a landline:
Click [Call from line1] or [Call from line2] to select the desired line.
Using a cellular line:
Click [Call from cellV], and click the desired cellular line list ([Cell1]
*1
to [Cell4]
*1
).
*1 After the Bluetooth device is paired, the device name is displayed.
Making a call from the caller
list
1 Click [Caller listV].
2 Click the phone number you want to call.
3 Using a landline:
Click [Call from line1] or [Call from line2] to select the desired line.
Using a cellular line:
Click [Call from cellV], and click the desired cellular line list ([Cell1]
*1
to [Cell4]
*1
).
*1 After the Bluetooth device is paired, the device name is displayed.
Making a call from the redial
list
1 Click [V] displayed to the right of [Dial number].
2 Click the phone number you want to call.
3 Using a landline:
Click [Call from line1] or [Call from line2] to select the desired line.
Using a cellular line:
Click [Call from cellV], and click the desired cellular line list ([Cell1]
*1
to [Cell4]
*1
).
*1 After the Bluetooth device is paired, the device name is displayed.
Making a call by entering a
phone number in the toolbar
1 Enter the phone number in the toolbar.
2 Using a landline:
Click [Call from line1] or [Call from line2] to select the desired line.
Using a cellular line:
Click [Call from cellV], and click the desired cellular line list ([Cell1]
*1
to [Cell4]
*1
).
*1 After the Bluetooth device is paired, the device name is displayed.
TG958x_(en)_QG.fm Page 8 Thursday, July 3, 2014 3:38 PM