To Next PageTo Next PageWhy is the caller information on my Panasonic KX-TG994SK displayed or announced late?
Depending on your phone service provider, the unit may display or announce the caller’s information at the 2nd ring or later. Move closer to the base unit.
Why does my Panasonic KX-TG994SK answer an incoming call on its own?
This might happen due to a false detection of ambient noise. Move the unit further away from the noise sources. If you are using other telephone that has Talking Caller ID feature turned on, it may also trigger false detection. Turn the Talking Caller ID feature off on the other telephone. To minimize false detection, decrease the sensitivity level of the answer by voice command.
Why is the dedicated key for Telemarketing call block not displayed on my Panasonic KX-TG994SK Cordless Telephone?
The MTELE.BLK.N key is not available while on the charger. Lift the handset from the charger. If the Auto talk feature is set to on, the call is answered automatically when the handset is lifted from the charger during an incoming call. Turn off the auto talk feature.
Why can't I use a cellular line on my Panasonic KX-TG994SK Cordless Telephone?
The unit cannot be used to talk on 2 cellular lines at the same time. Try again later.
Why can't I make a call using a landline on my Panasonic KX-TG994SK Cordless Telephone?
If you cannot make a call using a landline, the dialing mode may be set incorrectly. Change the setting.
What to do if Panasonic KX-TG994SK does not work?
If your unit isn't working, ensure the batteries are correctly installed. Fully charge the batteries. Check all connections. Try unplugging the base unit’s AC adaptor to reset it, then reconnect it. Also, ensure the handset is registered to the base unit.
Why can't I make local calls with my Panasonic KX-TG994SK using a cellular line?
If you cannot make local calls using a cellular line, you may need to add your area code when making cellular calls. Store your area code to automatically add it to the beginning of the 7-digit phone number when making cellular calls.
Why can't I register a handset to a Panasonic Cordless Telephone base unit?
If you cannot register a handset to a base unit, it may be because the maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit.
What to do if I cannot use voice paging on Panasonic KX-TG994SK Cordless Telephone?
You cannot use voice paging if other units are in use.
Why can't I make or answer cellular calls with my Panasonic KX-TG994SK?
You may not be able to make or answer cellular calls depending on the cellular phone’s compatibility. Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit. Only 1 Bluetooth device can be used with the unit at a time. The cellular phone is being used separately from your system.
General| Model | KX-TG994SK |
|---|---|
| Category | Cordless Telephone |
| Number of Handsets | 4 |
| Answering System | Yes |
| Link2Cell | Yes |
| Talking Caller ID | Yes |
| Bluetooth | Yes |
| Caller ID | Yes |
| Call Waiting | Yes |
| Speakerphone | Yes |
| Keypad Backlit | Yes |
| Display Type | LCD |
| Headset Jack | Yes |
| Intercom | Yes |
| Backlit Display | Yes |
| Power Source | AC adapter |
| Battery Type | Ni-MH |
| Battery Life | 7 days standby |
| Technology | DECT 6.0 |
