Changing the key detector name
1 Handset:
For key detector 1: MMENUN#6561
For key detector 2: MMENUN#6562
*1
For key detector 3: MMENUN#6563
*1
For key detector 4: MMENUN#6564
*1
*1 If you have 2 or more key detectors.
2 Enter the desired name (10 characters max.).
3 MSAVEN a MOFFN
Attaching the key detector to an easy-to-lose item
You
can attach the key detector to items such as a car key or house key, etc.
Locating and finding a mislaid item
You
can locate and find the mislaid item to which the key detector is attached using
the handset.
1 Handset: MMENUN#655
2 MbN: “Search” a MSELECTN
3 MbN: Select the desired key detector. a MSELECTN
R When the handset searches for the key detector, the handset emits the
detection beeps and displays the signal strength (5 levels) and level value
(1 – 100), and then the key detector emits responding beeps. As you point
the handset in the right direction and then move closer to the item:
– Handset: the frequency of the detection beeps will increase and a higher
signal strength and level value will be displayed.
– Key detector: the responding beeps are emitted during searching.
R The search is stopped after 3 minutes. To continue searching, repeat from
step 3.
R While searching, you can turn off the handset detection beeps by pressing
MMUTEN.
4 To stop searching, press MOFFN.
4
Installation
To Next Page
Loading...
