Handset key print
For the following function, the key prints are different for the supplied handset and
optional handset.
n KX-TGDA51: For KX-TGD510/KX-TGD530 series users
Function Supplied
handset
Optional
handset
(KX-TGDA51)
Flash MFLASHN
M N
*1
/MFLASHN
Call waiting MCALL WAITN
M N
*1
/MFLASHN
*1 The remote voice assist feature is only available for KX-TGD560 series.
n KX-TGDA50: For KX-TGD560 series users
Function Supplied
handset
Optional
handset
(KX-TGDA50)
Remote voice
assist
M N
MFLASHN/
MCALL WAITN
Registering a handset to a base unit
1 Base unit:
Press and hold MLOCATORN for about 5 seconds.
R If all registered handsets start ringing, press MLOCATORN again to stop,
then repeat this step.
2 Handset:
Place the handset on the base unit or charger, then wait until a long beep
sounds and
is displayed.
Note:
R If an error tone sounds, or if
is displayed, register the handset according to
the base unit’s operating instructions.
Display language
1 MMENUN#110
2 MbN: Select the desired setting. a MSAVEN a MOFFN
6
For assistance, please visit http://shop.panasonic.com/support
Installation
To Next Page
Loading...
