Answering landline calls with your
headset
To answer a landline call, press your
headset’s button referring to your headset
operating instructions.
When you finish talking, press your headset’s
button referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your
headset:
– press M N (STOP) on the base unit.
(KX-TGE460 series: page 4)
– press MZN on the base unit 2 times.
(KX-TGE470 series: page 4)
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone. (KX-TGE470 series: page 4)
– during an intercom call between the base
unit and handset. (KX-TGE470 series:
page 4)
– while listening to messages recorded on
the base unit answering system.
n To switch to your headset:
Turn on the headset referring to your
headset operating instructions.
n To switch to the base unit (KX-TGE470
series: page 4):
Press MZN on the base unit.
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 44).
n While the handset is on a landline call:
To join the conversation with your headset,
press your headset’s button referring to
your headset operating instructions.
n While your headset is on a landline call:
To join the conversation with the handset,
press M
N.
Adjusting your headset receiver
volume
Base unit
Press MjN or MkN repeatedly while using your
headset.
Note:
R Depending on your headset, the receiver
volume may not be adjustable.
For assistance, please visit http://shop.panasonic.com/support
57
Using Bluetooth® Devices
To Next Page
Loading...
