Panasonic KX-TGEA20EX

Questions and Answers:

W
Wesley RomanSep 1, 2025
Why is caller information not announced on my Panasonic Telephone?
- L
  lisa06Sep 1, 2025
  If caller information isn't being announced, here are some things to check: * The ringer volume for landline might be turned off. Adjust the ringer volume. * The ringer volume for cellular line might be turned off. Adjust the ringer volume. * When one handset is selected to ring for cellular calls, other units do not announce caller information. * The Talking Caller ID feature might be turned off. Turn it on. * The ring as cell mode is set to “On (without Talking CID)”. To change the mode, see page 17. * The number of rings for the answering system is set to “2 rings” or “Toll saver”. Select a different setting. * Your unit does not announce caller information while the other devices such as headset or handsets are engaged in a call.
T
Todd JonesSep 2, 2025
What should I do if liquid entered my Panasonic Telephone handset/base unit?
- J
  Jose DickersonSep 2, 2025
  If liquid has entered the handset/base unit: 1. Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset. 2. Leave the devices to dry for at least 3 days. 3. After they are completely dry, reconnect the AC adaptor and telephone line cord. 4. Insert the batteries and charge fully before use. If the unit still doesn't work properly, contact an authorized service center.
J
jmclaughlinSep 3, 2025
Why can't I pair a cellular phone to my Panasonic Telephone base unit?
- C
  Christopher RothSep 3, 2025
  If you're having trouble pairing a cellular phone, here are a few things to check: * Confirm that your cellular phone supports the hands-free profile (HFP) specification. * Ensure the Bluetooth feature of your cellular phone is turned on. * The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. * Your cellular phone may already be connected to another Bluetooth device. Turn it off or disconnect it from your cellular phone. * Some cellular phones may require you to enter the Bluetooth PIN to pairing. Confirm that you entered the correct PIN.
M
Mark DanielsSep 3, 2025
Why can't I connect a cellular phone to my Panasonic Telephone base unit?
- R
  randolphsherrySep 3, 2025
  If you're unable to connect a cellular phone to the base unit, try the following: * Confirm that your cellular phone is turned on. * Make sure your cellular phone is within the base unit range. * Ensure your cellular phone’s Bluetooth feature is turned on. * Depending on the state of the wireless environment, such as the presence of any electrical interference, there may be a delay even if the auto connection feature is turned on. You can connect to the base unit manually. * The cellular phone has not been paired to the base unit. Pair the cellular phone.
W
Whitney NguyenSep 4, 2025
Why can't I register a handset to a base unit on my Panasonic Telephone?
- D
  Daniel DiazSep 4, 2025
  If you cannot register a handset to a base unit, it's possible that the maximum number of handsets (6) is already registered. Cancel unused handset registrations from the base unit.
U
udukeSep 5, 2025
What to do if fully charged batteries in my Panasonic Telephone still flash or show shorter operating time?
- L
  Lauren HuffSep 5, 2025
  If you've fully charged the batteries but they still flash, display , or have a shorter operating time, try these steps: * Clean the battery ends and the charge contacts with a dry cloth and charge again. * It might be time to replace the batteries.
T
Timothy CruzSep 6, 2025
What to do if I cannot make local calls with the Panasonic Telephone handset using a cellular line?
- V
  Vickie GarciaSep 6, 2025
  If you cannot make local calls with the handset using a cellular line, you may need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls.
J
Jeremy RothSep 6, 2025
Why can't I make or answer cellular calls with my Panasonic Telephone handset?
- D
  Dale MillerSep 7, 2025
  If you are unable to make or answer cellular calls with the handset, consider the following: * Depending on the cellular phone’s compatibility, you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit. * Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). * The cellular phone is being used separately from your system.

Panasonic KX-TGEA20EX Specifications

General

GAP Compatible	Yes
Display	1.8-inch LCD
Battery	Ni-MH rechargeable battery
Caller ID	Yes
Number of Handsets	1
Call Waiting	Yes
Intercom	Yes
Type	Cordless Handset
Compatibility	Compatible with Panasonic KX-TG series
Features	Intercom
Range	Up to 50 meters indoors
Phonebook Capacity	100
Headset Jack	Yes (2.5mm)