Panasonic KX-TGEA61 - Getting Started; Initial Setup and Connections; Battery Installation Guide

Setting up
Connections/Wall mounting
Connect the AC adaptor to the power
o
utlet.
Drive the screws (
1
) (not supplied) into
the wall, if necessary.
2
27.2 mm (1
1
/1
6 inches)
2
1
2
1
Note:
R T
he AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
Battery installation
Important:
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 3.
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size.
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
R When unlocking (A) or locking (K) the
battery cover, make sure to align the arrow
positions.
Please do not turn more than excessively.
For KX-TGD583/KX-TGD584/KX-TGD585/
K
X-TGE484 users:
R Follow the directions on the display to set
up the unit.
Locking Unlocking
3
4
2
1
1
8
6
7
5
j
9
k
l
8
For assistance, please visit http://shop.panasonic.com/support
Getting Started
TGTA61(en)_0731_ver110.pdf 8 2018/07/31 18:41:44