30
KX-TGF340/KX-TGF342/KX-TGF343/KX-TGF344/KX-TGF345/KX-TGF372/KX-TGF373/KX-TGF374/KX-TGF375/KX-TG585/KX-TGFA30KX-TGF340/KX-TGF342/KX-TGF343/KX-TGF344/KX-TGF345/KX-TGF372/KX-TGF373/KX-TGF374/KX-TGF375/KX-TG585/KX-TGFA30
Frequently Used Items (Base Unit)
ex.)
Note:
(*1) When you enter the address or New Data, please refer to the table below.
Items Address Default Data New Data Remarks
Frequency 00 07 / 00 08 70/02 - - Use these items in a READ-ONLY mode to
confirm the contents. Careless rewriting may
cause serious damage to the computer system.
ID 00 02 ~ 00 06 Given value - -
Desired Number (hex) Input Keys Desired Number (hex) Input Keys
0 0 A [Flash] + 0
1 1 B [Flash] + 1
. . C [Flash] + 2
. . D [Flash] + 3
. . E [Flash] + 4
9 9 F [Flash] + 5
7). Press {OK} , a long confirmation beep
will be heard.
8).
Press to return to standby mode.
After that, turn the base unit power off and then power on.
Note: * To enter "Set dial mode", press {SELECT}
or
{>} at " Set tel line".
It is necessary to turn on the power of base unit.
New Data
_ _ _ _ _ _
Set Addr.:
Set Addr.:
{OFF}
CLEAR
OK
BACK
* "Set tel line" isn't displayed in Cell line only mode.
To return to normal mode, execute the following procedure:
1 {MENU} i {#}{1}{5}{7}
2 {V}/{^}: Select "off "i {SELECT}
3 {OFF}
To Next Page
Loading...
