– 8 –
Using Bluetooth devices
Copying phonebook entries from a Bluetooth cellular phone (phonebook transfer)
(Handset/Base unit)
You can copy phonebook entries from the paired cellular phones or other cellular phones (not paired) to the
unit’s phonebook.
1 {MENU}(618
2 To copy from paired cellular phones:
{r}: Select the desired cellular phone. s {SELECT}
LCopied items are stored to the group (“Cell 1” or “Cell 2”) which the cellular phone is paired to.
To copy from other cellular phones (not paired):
{r}: “Other cell” s {SELECT} s {r}: Select the group you want to copy to. s {SELECT}
3 When “Use the cell to transfer phone book” is displayed: Go to step 4.
When “Select mode” menu is displayed:
{r}: Select “Auto” or “Manual”. s {SELECT}
“Auto”: Download all entries from the cellular phone automatically. Go to step 5.
“Manual”: Copy entries you selected.
L“Select mode” menu is displayed only when the cellular phone supports Phone Book Access Profile
(PBAP) for Bluetooth connection.
LSome cellular phones may require you to perform an operation on the cellular phone even if you select
“Auto”.
4 Cellular phone:
Follow the instructions of your cellular phone to copy phonebook entries.
LFor other cellular phones (not paired), you need to search for and select the base unit. The Bluetooth
PIN (default: “0000”) may be required. If your cellular phone shows PassKey confirmation on its
display, follow the directions to proceed.
LThe entries being copied are displayed on the unit.
5 Wait until “Completed” is displayed.
6 Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {EXIT}
TGF88x(en)_QG.fm Page 8 Friday, November 1, 2019 1:08 PM
To Next Page
Loading...
