EasyManua.ls Logo

Panasonic KX-TGF882 - Getting Started; Setting up

Panasonic KX-TGF882
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 9 –
Using a Bluetooth headset (optional)
By pairing a Bluetooth headset to the base unit, you can enjoy hands-free conversations when talking on
landline calls.
LOnly 1 Bluetooth device can be used with the unit at a time.
*1
*1 You cannot use a Bluetooth headset to talk on a cellular line.
1 Pair using the handset or base unit.
2 Pairing
Pairing a Bluetooth headset to the base unit (Handset/Base unit)
1 Bluetooth headset: Set your headset to pairing mode.
LRefer to your headset’s operating instructions.
2 {MENU}(621
3 If your headset PIN is “0000”, go to step 4.
If your headset PIN is not “0000”, press {CLEAR}, then enter your headset’s PIN.
LTypically, default PIN is 0000. Refer to your headset’s operating instructions.
4 Press {OK}, then wait until a long beep sounds. s {OFF}/{EXIT}
5 When is displayed on the base unit, the headset is available for use.
Operating a Bluetooth headset using a landline
LRefer to your headset’s operating instructions for details.
LSome features described here may not be available depending on Bluetooth headset.
NMaking landline calls with your headset (Base unit)
1 Press your headset’s button.
2 Dial the phone number using the base unit after hearing the dial tone on your headset.
3 When you finish talking, press your headset’s button.
NAnswering landline calls with your headset
To answer a landline call, press your headset’s button.
When you finish talking, press your headset’s button.
LIf you cannot hang up the call using your headset, press {s} on the base unit 2 times.
NSwitching between the base unit and your headset
You can switch between the base unit and your headset:
during a landline call with the base unit.
during an intercom call between the base unit and handset.
while listening to messages recorded on the base unit answering system.
To switch to your headset:
Press {} on the base unit.
To switch to the base unit:
Lift the corded handset to talk with the corded handset.
or
Press {s} to talk with the speakerphone.
Using Bluetooth devices
2
1
TGF88x(en)_QG.fm Page 9 Friday, November 1, 2019 1:08 PM

Other manuals for Panasonic KX-TGF882

Related product manuals