Registering a handset to a base unit
1 B
ase unit:
Press and hold MLOCATORN for about 5 seconds.
R If all registered handsets start ringing, press MLOCATORN again to stop,
then repeat this step.
2 Handset:
Place the handset on the base unit or charger, then wait until a long beep
sounds and
is displayed.
N
ote:
R If an error tone sounds, or if
is displayed, register the handset according to
t
he base unit’s operating instructions.
Display language
1 MM
ENUN#110
2 MbN: Select the desired setting. a MSAVEN a MOFFN
8
For a
ssistance, please visit http://shop.panasonic.com/support
Installation
To Next Page
Loading...
