Panasonic KX-TGP500 B01 - Page 11

Getting started
11
Document Version 2010-07
Main menu icons
The following icons are shown when you press
K (middle soft key) in standby mode.
Soft key icons
Temporarily switching the handset
display mode
You can select to display either a single item or
multiple items on one screen at a time for the
phonebook list, caller list, and redial list.
You can temporarily switch the handset display
mode as follows by pressing A shown when
viewing the lists with:
– multiple items are shown on one screen at a
time.
– an item is shown on one screen at a time. You
can confirm the detailed information.
Note:
L When in multiple display mode, you can move
screens by pushing the joystick right or left,
without scrolling down or up through the list:
– Push the joystick right to go to the next
screen.
p Do not disturb (page 36)
q Anonymous calls (Block Caller ID)
(page 38)
6 The line has received new voice
mail messages. (page 44)
,! Handset 1 is in use.
“1”-“6”: Handset
s The shared line is in use (page
18).
t The line is now registering the
VoIP server.
Line number (8 max.)
L When receiving a call, the last 4
digits are displayed.
Icon Feature
m Line Status
IP Service
( Ringer Setup
" Initial settings
C Phonebook
W Caller List
Icon Action
^ Returns to the previous screen.
] Allows you to make a call.
1
*1
K
*2
Displays the menu.
M Accepts the current selection.
( Displays the character entry
mode for phonebook search.
(page 20, 23)
/ Selects a character entry mode.
W L Erases the selected item.
L Cancels the base unit software
update.
^ Erases a number/character.
Item Meaning
1
*1
Puts the call on mute.
n
*2
Opens the phonebook.
} Sends the phonebook item(s) to
selected unit to copy.
~ Adds the phonebook item.
I Saves the phonebook item.
/ Switches between AM, PM, and
24-hour time entry.
w Establishes a conference call.
2 Turns off the ringer.
[ L Registers the handset to the
base unit.
*1
L Updates the base unit
software.
\ Opens the caller list.
A
*1
Switches display mode between
single item and multiple items.
(page 11)
f Selects a line.
H Puts the call on hold.
h Switches a call between 2 outside
calls.
i Transfers a call.
*1 Handset only
*2 KX-TGP550 base unit only
Icon Action