Special Features
43
Document Version 2010-07
Editing a caller’s phone number
before calling back
1
\ (left soft key)
2 {V}/{^}: Select the desired entry.
L You can see the detailed information about
the caller by pressing A.
3 1
4 {V}/{^}: “Edit and Call” i M
5 Edit the number.
L Press dial key ({0} – {9}) to add, ^ to
delete.
6 Press ] or {C}.
1 \ (right soft key)
2 {V}/{^}: Select the desired entry.
L If an arrow (>) is displayed after the
number, the whole phone number is not
shown. Press {>} to see the remaining
numbers. To return to the previous display,
press {< }.
3 K
4 {V}/{^}: “Edit and Call” i M
5 Edit the number.
L Press dial key ({0} – {9}) to add, ^ to
delete.
6 Lift the corded handset.
Note for handset and base unit:
L In step 6, the unit automatically uses the line the
call was received from to call back. If you want to
select a line:
Handset: f i {V}/{^}: Select the desired
line. i Press ] or {C}.
Base unit (KX-TGP550): f i {V}/{^}:
Select the desired line. i Lift the corded
handset.
Erasing selected caller information
1
\ (left soft key)
2 {V}/{^}: Select the desired entry. i 1
3 {V}/{^}: “Erase” i M
4 {V}/{^}: “Yes” i M i {i}
1 \ (right soft key)
2 {V}/{^}: Select the desired entry. i W
3 {V}/{^}: “Yes” i M i {b}
Erasing all caller information
1
\ (left soft key) i W
2 {V}/{^}: “Yes” i M
1 \ (right soft key) i W
2 {V}/{^}: “Yes” i M
Storing caller information to the
phonebook
1
\ (left soft key)
2 {V}/{^}: Select the desired entry.
L You can see the detailed information about
the caller by pressing A.
3 1
4 {V}/{^}: “Add Phonebook” i M
5 Continue from step 3, “Editing entries”, page
20.
Y Handset
: Base unit
Available for: KX-TGP550
Y Handset
: Base unit
Available for: KX-TGP550
Y Handset
: Base unit
Available for: KX-TGP550
Y Handset