3. Use a conductive mat on the worktable.
4. Do not touch IC or LSI pins with bare fingers.
2. CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommendenced by the manufacturer.
Dispose of used batteries according to the manufacture’s Instructions.
3. Battery
3.1. Installing the Batteries
Install the three included batteries in the battery compartment. They work as emergency power
during a power failure. The unit will work as a standard telephone, so that you can make or
answer external calls with the handset. (You cannot use the intercom.)
3
To Next Page
Loading...
