Panasonic KX-TSC11 - Password and Call Restriction Settings

31
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Setting the Password
You can change the password for the call restriction.
The factory preset password is “1111”.
To set the password
Make sure that the handset is on the cradle.
1
Press [FUNCTION/EXIT] .
2
Scroll to “ CHANGE PASSWORD? ” by
pressing [] or [] .
3
Press [ENTER] .
4
Enter the current password.
5
Press [ENTER] .
• If the wrong password was entered at
step 4, “ ERROR ” will be displayed, then
“– – – –” will be displayed. Enter the
correct password.
6
Enter a new password using a 4-digit
number. (Ex. “1234” is entered.)
7
Press [ENTER] .
• The display will return to step 2. To exit
the programming mode, press
[FUNCTION/EXIT] or wait for
60 seconds.
• You can exit the programming mode any time by pressing [FUNCTION/EXIT] .
Please write down your password. If you forget your password, consult your
nearest Panasonic service center.
CHANGE PASSWORD?
▼
▼
CURRENT PASSWORD
:
NEW PASSWORD
:1234
SAVED
E-PQQX14369ZA.book 31 ページ ２００４年１２月１０日 金曜日 午後４時１分