12
“
Settings
Setting the LCD Contrast
You can select the LCD contrast level from 1 to 6 by programming. Your
phone comes from the factory set to 3.
Make sure that the handset is on the cradle, the AC adaptor is
connected and the SP-PHONE/HEADSET indicator light is off.
1
Press (FUNCTION/EXIT).
2
Press (_) or (^) repeatedly until “LCD
CONTRAST ?” is displayed.
3
Press (fl) OK/EDIT.
≥The current setting is displayed.
4
Press (_) or (^) to select the desired
LCD contrast level.
≥Each time you press (_) or (^), the level
will change on the display.
5
Press (fl) OK/EDIT.
≥The display will return to step 2. To return
to the standby mode, press
(FUNCTION/EXIT) or wait for 60
seconds.
9:30PM12
/
27
SAVE AUTO# ?
9:30PM12
/
27
LCD CONTRAST ?
9:30PM12
/
27
∑∑∑
___
PQQX12879ZA-BM02 01.3.7 3:51 PM y[W 12
To Next Page
Loading...
