Panasonic KX-TVM50 User Manual (English)

Other manuals for Panasonic KX-TVM50

Programming Guide200 pages

Feature Manual120 pages

Programming Manual188 pages

Getting Started56 pages

Manual72 pages

Installation Manual252 pages

Questions and Answers:

A
aaroncarrollJul 26, 2025
What to do if nothing is heard from Panasonic Voicemail VPS?
- W
  Wayne MartinezJul 26, 2025
  If you're experiencing silence when accessing the VPS, verify that you're using the correct extension number. If the issue persists, check the VPS jacks are properly connected to the PBX jacks. Ensure the System Program [130] of the KX-TA or KX-TE series aligns with the actual connection. Also, check the "1-4 VPS (DPT) Port Assignment" screen of the KX-TD500, or System Program [117] or [126] of other KX-TD series PBXs, or the "Groups-VM(DPT) Group-Unit Setting" and "Configuration- Extension Port" screens of KX-TDA series PBXs that use DPT Integration to confirm the programming matches the physical connection. If unsure, ask your System Administrator.
A
Anthony RobinsonJul 31, 2025
How to fix Panasonic Voicemail unable to call outside party?
- D
  Diane KhanJul 31, 2025
  If you're unable to call an outside party, reset the trunk access sequence of the connected PBX. Refer to "Dial Number" in section 2.1.4 and "Number of Digits to Access Outside Line" in section 2.5.4 of the Programming Manual. Also, check "Outgoing Call No Answer Time" in section 2.5.4 of the Programming Manual. When setting a Dial Number for Device Notification or a telephone number for External Message Delivery, keep in mind the "Note" for "Dial Number" in section 2.1.4.
F
fpinedaAug 4, 2025
How to fix Panasonic Voicemail unable to reconnect on busy line?
- D
  David BakerAug 4, 2025
  To resolve the issue of being unable to reconnect when the line is busy, adjust the busy signal reconnection procedure to match that of the connected PBX. Consult "Reconnect Sequence on Busy" in section 2.5.4 of the Programming Manual.
A
Andrew MendezAug 8, 2025
What to do if Panasonic Voicemail unable to reconnect on no-response?
- C
  carl34Aug 8, 2025
  To fix the issue of being unable to make a no-response reconnection, adjust the no-response reconnection procedure to match that of the connected PBX. Refer to "Reconnect Sequence on No Answer" in section 2.5.4 of the Programming Manual.
L
Lisa CunninghamAug 12, 2025
Why Panasonic Voicemail unable to call extension?
- A
  Alicia JonesAug 12, 2025
  If you're unable to call an extension, check the PBX Extension Numbering Plan.
W
willisaimeeAug 17, 2025
What to do if Panasonic Voicemail dialing is not registered?
- H
  Heather VargasAug 17, 2025
  If dialing is not registered, switch to a touch tone telephone. Also, adjust the integration mode properly between the VPS and your PBX, as described in "Integration Mode" in section 2.5.4 of the Programming Manual.
M
Mary ChristensenAug 21, 2025
What to do if Panasonic Voicemail VPS does not operate?
- J
  jessicamartinezAug 21, 2025
  If the VPS does not operate, try the following: 1. Change the printed circuit board. 2. Check the connection between the VPS and PBX. 3. Insert the card firmly into the card slot.

Panasonic KX-TVM50 Specifications

General

Integrated voicemail	Yes
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (typical)	40 W
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions