Page 3
E64C-AC00
WARNING
If you sense any danger or abnormality, press an emergency stop button to
stop operation.
If you continue to operate the machine in a dangerous or abnormal state, an accident or a
breakdown will occur.
DT401-F has two emergency stop buttons. Pressing any one of them stops operation.
Press the nearest one.
Eliminate the cause of danger or abnormality, and then restart operation.
To reset, pull the emergency stop button.
Emergency stop button
(At the rear side)
M107
Emergency stop button
(At the front side)
E64C-E-XXA00-A03-00
To Next Page
Loading...