4
Organization of manuals
TOrganization of instruction manuals
This machine is accompanied with the following five manuals.
They are classified into five types to the purpose of work.
Use the appropriate one according to the purpose.
The production data of the line including this machine are programmed on PT.
Refer to the instruction manuals accompanied with PT.
Manuals for this machine
Manual type
Explanation
Operations Manual
This manual is organized for the operators and engineers of the machine,
describing operating instructions, precautions, and the other information
you should note.
Maintenance Manual
This manual is organized for the persons who maintain the machine,
describing simple checks, adjustments, and replacement of consumable
parts.
And also troubleshooting is described.
Programming Manual
This manual is organized for the engineers who program the production
data of the line, describing how to modify and manage the production data.
And also the error messages of the recognition device are described.
Reference Manual
This manual describes the functions and operating instructions.
Installation Manual
This manual describes installation procedures.
E64C-E-MMA00-A01-00
To Next Page