EasyManua.ls Logo

Panasonic KXTGE232B - Page 3

Panasonic KXTGE232B
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Caller IDITalking Caller ID
Problem
Caller information is not
displayed
Caller information is displayed
or announced late.
Caller information is not
announced
The caller list/incoming phone
numbers are not edited
automatically
I cannot dial the phone number
edited in the caller list.
Time on the unit has shifted.
Useful Information
Cause/solution
You must subscribe to Caller ID service. Contact your
service provider/telephone company for details
If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
The name display service may not be available in some
areas. Contact your service provider/telephone company
for details.
Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again
Depending on your service provider/telephone company,
the unit may display or announce the caller's information
at the 2nd ring or later
Move closer to the base unit.
The handset or base unit's ringer volume is turned off.
Adjust it (page 18, 29)
The Talking Caller ID feature is turned off. Turn it on
(page 29)
The number of rings for the answering system is set to "2
rings" or "Toll saver" Select a different setting
(page 44)
If the base unit and another handset are having an
intercom call, your handset does not announce caller
information
The Caller ID number auto edit feature is turned off. Turn
it on and try again (page 31).
You need to call back the edited number to activate Caller
ID number auto edit.
The phone number you dialed might have been edited
incorrectly (for example, the long distance "1" or the area
code is missing). Edit the phone number with another
pattern (page 38).
Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to "Manual"
(off) (page 29)
For assistance, please visit http://www.panasonic.com/help
53

Related product manuals