What to do if my Panasonic LP-Z does not start?
If your Panasonic Label Maker isn't starting, make sure the power cable is securely connected. Also, verify that the key switch is turned on. Ensure that the power supply is working. If none of these steps work, the fuse might be blown and needs replacing.
Explains hazard and instruction symbols used for safety precautions.
Outlines basic procedures from start-up to power off.
Details setting procedures for basic marking functions.
Explains basic settings for marking 3D objects.
Describes the functions and features of the laser marker.
Explains the screen for operator adjustments.
Covers maintenance and service procedures.
Details how to select different marking modes.
Explains how to set various marking functions.
Details the conditions for marking.
Explains laser settings for quality control.
Describes settings for marking timing and moving objects.
Explains hazard and instruction symbols used for safety precautions.
Outlines basic procedures from start-up to power off.
Details setting procedures for basic marking functions.
Explains basic settings for marking 3D objects.
Describes the functions and features of the laser marker.
Explains the screen for operator adjustments.
Covers maintenance and service procedures.
Details how to select different marking modes.
Explains how to set various marking functions.
Details the conditions for marking.
Explains laser settings for quality control.
Describes settings for marking timing and moving objects.
General| Automatic Cutter | Yes |
|---|---|
| Print Method | Thermal transfer |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Print Speed | 10 mm/s |
| Connectivity | USB |
| Tape Width | Up to 24mm |
| Tape Type | Laminated |
| Display | LCD |
| Label Width | Up to 24 mm |
| Memory | Varies by model |
| Power Source | AC adapter |
| Battery Life | Varies by model |
| Supported OS | Windows |
To Next Page
