What to do if my Panasonic LP-Z130 does not start?
If your Panasonic Label Maker isn't starting, make sure the power cable is securely connected. Also, verify that the key switch is turned on. Ensure that the power supply is working. If none of these steps work, the fuse might be blown and needs replacing.
Covers maintenance procedures and system status checks.
Details how to set and input the character string for marking.
Covers setting functional conditions like date-related marking and counters.
Specifies conditions for character marking: position, size, font, and laser settings.
Adjusts laser power, scan speed, and marking quality control settings.
Measures marking energy per trigger and sets upper/lower limits for quality control.
Sets environment parameters and checks system status for laser marker operation.
Specifies settings for output terminals and I/O connector signals for external devices.
Checks laser output signals and parameters without actual operation.
Improves accuracy of laser output measurement and correction results.
Checks and corrects current laser power against the shipping output.
Calibrates the power monitor to ensure accuracy of power measurement results.
Provides measures for problems related to power supply and unit startup.
Details causes and measures for laser pumping failures and remote mode issues.
Offers solutions for issues where the touch panel or monitor shows nothing or is unresponsive.
Addresses problems where marking cannot be done or laser radiation indicator is incorrect.
Provides solutions for issues like faded marking, uneven density, or character chipping.
Troubleshoots issues related to marking unstable positions or characters on moving objects.
Covers problems with laser marker control via external signals or serial communication.
Details error codes, their descriptions, and measures for resolving alarms and warnings.
Provides a comprehensive table of input ranges for various settings across different models.
Covers maintenance procedures and system status checks.
Details how to set and input the character string for marking.
Covers setting functional conditions like date-related marking and counters.
Specifies conditions for character marking: position, size, font, and laser settings.
Adjusts laser power, scan speed, and marking quality control settings.
Measures marking energy per trigger and sets upper/lower limits for quality control.
Sets environment parameters and checks system status for laser marker operation.
Specifies settings for output terminals and I/O connector signals for external devices.
Checks laser output signals and parameters without actual operation.
Improves accuracy of laser output measurement and correction results.
Checks and corrects current laser power against the shipping output.
Calibrates the power monitor to ensure accuracy of power measurement results.
Provides measures for problems related to power supply and unit startup.
Details causes and measures for laser pumping failures and remote mode issues.
Offers solutions for issues where the touch panel or monitor shows nothing or is unresponsive.
Addresses problems where marking cannot be done or laser radiation indicator is incorrect.
Provides solutions for issues like faded marking, uneven density, or character chipping.
Troubleshoots issues related to marking unstable positions or characters on moving objects.
Covers problems with laser marker control via external signals or serial communication.
Details error codes, their descriptions, and measures for resolving alarms and warnings.
Provides a comprehensive table of input ranges for various settings across different models.
General| Brand | Panasonic |
|---|---|
| Model | LP-Z130 |
| Category | Label Maker |
| Language | English |
To Next Page
