Panasonic LS-400 Series - Page 2

2
* This product complies with 21 CFR 1040.10 and
1040.11 Laser Notice No. 50, dated June 24,
2007, issued by CDRH (Center for Devices and
Radiological Health) under the FDA (Food and Drug
Administration).
5 m
(16.404 ft)
1 m
(3.281 ft)
RF-33
RF-31
Compact
reflector
RF-310
RF-230
RF-330
RF-310
RF-330
30 m
(98.425 ft)
7 m
(22.966 ft)
A line width of approx. 240 mm
9.449 in (typical) at a 1,000 mm
39.370 in sensing distance
Long sensing range spot reflective type
LS-H21-A
Long sensing range
coaxial retroreflective type
LS-H92
Connector type
LS-401/401P/403
Cable type (with external input)
LS-401-C2 / LS-401P-C2
Coaxial retroreflective type
LS-H91
Coaxial retroreflective type
LS-H91-A
Amplifiers
Long sensing range line
reflective type LS-H22
Class 1 type
Class 1 type
A spot size of approx. 10 × 8 mm 0.394 × 0.315 in
at a 3 m 9.843 ft sensing distance (Note 2)
A spot diameter of approx.
ø1 mm ø0.039 in at a 1 m
3.281 ft sensing distance (Note 1)
A line width of approx. 115 mm
4.528 in (typical) at a 500 mm
19.685 in sensing distance
Long sensing range
spot reflective type
LS-H21
Easy-to-use sealing-type
reflective tape available
Easy-to-use sealing-type
reflective tape available
500 mm
(19.685 in)
A spot diameter of approx. ø1 mm
ø0.039 in at a 1,000 mm 39.370 in
sensing distance (Note 1)
Notes: 1) The spot diameter is a typical example. The measurement values given here
were determined with a center light intensity of 1/e
2
(13.5 %).
2) This is the reference value from visual observation.
A spot diameter of approx. ø1 mm ø0.039 in
at a 1 m 3.281 ft sensing distance (Note 1)
A spot diameter of approx. ø0.2
mm
ø0.008 in at a 50 mm 1.969
in sensing distance (Note 1)
A spot diameter of approx. ø0.2 mm ø0.008 in
at a 50 mm 1.969 in sensing distance (Note 1)
Digital Laser Sensor
Amplier-separated
LS-400 SERIES
User-friendly, high precision
laser sensing!
We offer 6 types of laser sensor heads for various applications
These products are Class 2
(LS-H□-A: Class 1) laser in
compliance with IEC / JIS
/ GB standards and FDA*
regulations Do not look at the
laser beam directly or through
optical system such as a lens.
Conforming to
FDA regulations
(
LS-H
□F only
)
Recognition
(Excluding LS-403)
Certified
(Some models only)
Interference
prevention
A
utomatic
sensitivity setting
Test input
Timer
Light intensity
monitor
PNP output
type available