20
DVQX1546 (ENG)
Preparation/Basic
The battery that can be used with this unit is DMW-BCM13E.
• Charge the battery in areas with an ambient temperature, between 10 oC and 30 oC
(50 oF and 86 oF) (same as the battery temperature), is recommended.
Connect the camera and the AC adaptor (supplied) B or a PC D.
• The AC adaptor (supplied) and USB connection cable (supplied) are for this camera
only. Do not use them with other devices.
• Do not use any other USB connection cables except the supplied one.
• Do not use any other AC adaptors except the supplied one.
Charging the Battery
Insert the battery into this unit.
Check that this unit is turned off.
[USB/CHARGE] socket
• Place the camera in an upright position, and find the
terminal at the bottom.
• Check the direction of the terminals and plug in/out
straight holding onto the plug.
(It may result in malfunction by the deforming of the
terminal if it is plugged in obliquely or in wrong direction.)
Do not connect devices to incorrect terminals. Doing so
may cause malfunction.
A Charging lamp
B AC adaptor (supplied)
C To power outlet
D PC (Turned on)
E USB connection cable
(supplied)
DC-FT7-TS7GN-DVQX1546_eng.book 20 ページ ２０１８年５月１０日 木曜日 午後３時４分
To Next Page
Loading...
