Recording
35
(ENG) DVQX1546
∫ Cancelling 4K Photo
In step
2, select [ ].
• When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera
temperature rises. Select [ ] ([4K Pre-Burst]) only when recording.
• Recording stops when the continuous recording time exceeds 29 minutes and
59 seconds.
When using an SDHC memory card, you can continue the recording of a 4K photo
without interruption even if the file size exceeds 4 GB, but the 4K photo will be recorded
and played back in separate burst files.
With an SDXC memory card, you can save a 4K photo with a burst file size exceeding
4 GB as a single file.
1 Select an image with the [ ] icon on the
playback screen, and press 3.
• The slide view screen, where you select pictures, is
displayed.
2 Press 2/1 to select the frame to be saved as a
picture.
• Select [ ]/[ ] and press [MENU/SET] to switch
to the previous or next slide view.
• Press [Fn1] to switch to marker operation. You can
press 2/1 to skip to the next marker position. ([4K
Burst(S/S)] only)
• You can also select scenes on the 4K burst playback
screen by pressing [Fn2]. ([4K Burst]/[4K Burst(S/S)] only)
For details, refer to the “Operating Instructions for advanced features (PDF format)”.
3 Press [MENU/SET] to save the picture.
• The picture will be saved in JPEG format.
Selecting pictures from 4K burst file and saving
You can save pictures taken during a 5 second period at once by using
[4K PHOTO Bulk Saving] in the [Playback] menu.
DC-FT7-TS7GN-DVQX1546_eng.book 35 ページ ２０１８年５月１０日 木曜日 午後３時４分
To Next Page
Loading...
