45
Recording
(ENG) DVQX2263
• The 5-Axis Hybrid Image Stabilizer function can be used with all lenses.
Set [E-Stabilization (Video)] in [Stabilizer] to [ON] in the [Rec] menu.
The recording screen displays the following icons when [ON] is set:
– Panasonic lenses compatible with Dual I.S. Mode: [ ]/[ ]
– Other than the above: [ ]
• If the recording screen icon is not indicated with [ ] or [ ] even when a supported
lens is being used, update the lens firmware to the latest version.
For the latest information on supported lenses or to download their firmware, refer to our
website.
∫ Using the Image Stabilizer
• When using a lens with an O.I.S. switch, set it to [ON].
• When using lenses without a function for communicating with this camera, a message asking
you to check the focal length setting is displayed after you turn on the camera.
Correctly operating the image stabilization function requires that the focal length be set to
match the attached lens.
Set the focal length in accordance as prompted by the message.
This can also be set using the menu. (P46)
Applicable modes:
Set the image stabilizer movement to match the recording situation.
Lenses without the image
stabilizer function (Based
on the Micro Four Thirds
System standard/Four
Thirds System standard)
Body /
When using a Leica lens
mount adaptor (optional)/
Mount adaptor made by
another manufacturer
Body /
Image Stabilizer Settings
> [Rec]/ [Motion Picture] > [Stabilizer]
[Operation
Mode]
[]
(Normal)
Camera shake is corrected for up/down, left/right, and
rotational movements.
[]
(Panning)
Camera shake is corrected for up/down movements.
This mode is ideal for panning (a method of taking pictures
which involves turning the camera to track the movements of a
subject which continues to move in a fixed direction).
[OFF]
The image stabilizer does not work. ([ ])
• When using a lens with an O.I.S. switch, set the switch to
[OFF].
MENU
DC-G95DPP-DVQX2263_eng.book 45 ページ ２０２２年３月１５日 火曜日 午後２時３９分
To Next Page
Loading...
Need help?
General
