81
Others
(ENG) DVQX2263
• When [4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster.
Set these settings only when recording.
• When connected to Wi-Fi, the battery drains quickly.
Turn the camera off frequently such as by using [Economy].
• When drive mode is set to [ ] (Burst), pressing and holding the shutter button will take burst
pictures.
• When bracketing is set, then pressing the shutter button records multiple images while
automatically changing the settings.
• Confirm the following details:
– Is the subject outside of the focus range?
– Is [Shutter AF] set to [OFF]?
– Is [Focus/Release Priority] set to [RELEASE]?
– Is AF Lock set where it is not appropriate?
• If there are fingerprints or dirt on the lens, the focus may be set to the lens and not the subject.
• The shutter speed will become slower and the stabilizer function may not work properly when
recording in dark places.
In these cases, use a tripod and the self-timer when recording.
• This is characteristic of MOS sensors which serve as the camera’s
pickup sensors.
This is not a malfunction.
• When using the electronic shutter, lowering the shutter speed may
reduce the effect of the horizontal stripes.
• If flicker or horizontal stripes are noticeable when recording motion
picture, this can be mitigated by fixing the shutter speed.
Either set [Flkr Decrease], or record in Creative Video Mode.
The battery becomes flat too quickly.
Multiple images are recorded at once.
The subject is not focused properly.
The recorded image is blurred.
The stabilizer is not effective.
Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.
DC-G95DPP-DVQX2263_eng.book 81 ページ ２０２２年３月１５日 火曜日 午後２時３９分
To Next Page
Loading...
Need help?
General
