150
6. Stabiliser, Zoom and Flash
Image Stabiliser
Applicable modes:
The camera detects jitter during recording and automatically corrects it, so you can record
images with reduced jitter.
• When using an interchangeable lens with O.I.S. switch, stabiliser function is activated if the
O.I.S. switch of the lens is set to [ON]. ([ ] is set at the time of purchase)
∫ Setting the Stabiliser in the [Rec] menu
1
Select the menu. (P50)
2
Press 3/4 to select the item and then press [MENU/SET].
• The [Stabilizer] feature is only available if the lens you are using has an internal stabiliser.
A lens which supports the stabiliser function is required.
• The interchangeable lens (H-FS12032/H-FS35100/H-PS14042) supports the Optical Image
Stabiliser function.
> [Rec] > [Stabilizer]
[]
([Normal])
Vertical and horizontal shake are compensated for.
[]
([Panning])
Camera shake is corrected for up/down movements.
This mode is ideal for panning (a method of taking
pictures which involves turning the camera to track the
movements of a subject which continues to move in a
fixed direction).
[OFF]
[Stabilizer] does not work.
(This can be selected only when using a lens without the [O.I.S.] switch.)
MENU
To Next Page
Loading...
Need help?
General
