63
Recording
(ENG) DVQX1072
8 Press the motion picture button (or shutter button) to
start recording.
• If you have enabled [Focus Transition Rec], Focus
Transition will start when you start recording a motion
picture.
9 Touch [POS 1], [POS 2], or [POS 3] to start Focus
Transition.
• The same operation can be performed by pressing 2/1 to
select the position and pressing [MENU/SET].
• The MF Guide will display the current focus position A and the registered focus position
B.
• Press [ ] to end Focus Transition.
10 Press the motion picture button (or shutter button) again to stop recording.
• Maintain the same distance to the subject after setting the focus position.
• The moving speed of focus varies depending on the lens being used.
By cropping your motion picture down from the 4K angle of view to Full High Definition,
you can record a motion picture that pans and zooms in/out while leaving the camera in a
fixed position.
• The motion picture size automatically changes to [FHD].
• Hold the camera firmly in place while recording.
1 Set the mode dial to [ ].
2 Select the menu. (P24)
• Any of the operations below will clear the focus position settings. To use them again, re-register
focus positions.
– Operating the camera on/off switch
– Zoom operation
– Switching the Focus Mode
– Switching the Recording Mode
– Replacing the lens
Recording Motion Pictures that Pan and Zoom While Maintaining a
Fixed Camera Position ([4K Live Cropping])
Pan Zoom in
> [Creative Video] > [4K Live Cropping] > [40SEC]/[20SEC]
POS 2 POS 3POS 1
POS 1
MENU
DC-GH5BodyGN-DVQX1072_eng.book 63 ページ ２０１７年２月１３日 月曜日 午前１１時４５分
To Next Page
Loading...
Need help?
General
