12
• Step 4. Display the Initial Settings:
While pressing [ MENU/SET ] button and “[ RIGHT ] of Cursor buttons” simultaneously, turn the power off.
The “Initial Settings” menu is displayed.
There are two kinds of “Initial Settings” menu form as follows:
[ CASE 1. After replacing the Main P.C.B. and/or Flash-ROM ]
When Main P.C.B. has just been replaced, 14 model suffixes are displayed as follows. (three pages in total)
[CASE 2. Other than “After replacing the Main P.C.B. and/or Flash-ROM”]
To Next Page
Loading...
