25
7 Troubleshooting Guide
7.1. Checking Method of Body
1. Initial Inspection Tips (Before Determine The Unit Being Faulty/Defective):
Since this unit is equipped with various functions/settings, some phenomenon/effect might be caused by miss usage of func-
tion and/or settings.
It might be made a miss-judgement caused by miss usage of function & settings although the unit is working properly without
fault.
Therefore, check/confirm the followings before concluding/determine the unit being faulty/defective.
NOTE: Refer to the Operating Instructions about content of various settings.
If it is hard to determine whether the resolution is out of specification or not, proceed the “RESOLUTION INSPECTION”,
before replacing the Lens Main Unit. (The unit might be mishandling, dropping or others.)
2. Reference information
To Next Page
Loading...
