120
4K Photo and Drive Settings
Recording with the 4K Photo function and selecting pictures to save
Marker
When selecting and saving pictures from a 4K burst file, you can select pictures easily by
skipping between marked positions.
Two types of markers are available.
White marker: This is manually set during recording or
playback.
Green marker: This is automatically set by the camera during
recording. (Auto Marking function)
Marker operation screen
■
Skips to the marked positions
When [
] is touched on the slide view screen or 4K burst playback screen, the marker
operation screen appears and you can skip to the marked positions. Touch [ ] to
return to the original operation.
Operation Touch operation Description
/
/
Moves to the previous/next marker.
Auto Marking function
The camera automatically sets markers on scenes in which a face or the movement of a subject is
detected.
(Example: At the scene when a vehicle passes by, a balloon bursts, or a person turns around)
• Up to 10 markers are displayed for each file.
• In the following cases, markers may not be set by the Auto Marking function depending on the
recording conditions and the status of subjects.
– The camera is moving because of panning or jitter
– The movement of a subject is slow/small, or the subject is small
– A face is not facing front
To Next Page
Loading...
