198
Using Menu Functions
Menu list
→ [Setup]
[Power Button(At Power ON)]
Sets the operation of the power button when turning on the camera.
[LONG-PRESS]
You can turn on the camera by pressing and holding the camera [ON/OFF]
button.
• Selecting the [LONG-PRESS] setting reduces the risk of the power turning
on unintentionally while the camera is in a bag or pocket. (When the camera
is turned on, the lens barrel will extend. Applying pressure to the lens barrel
can cause it to malfunction.)
[SHORT-PRESS]
You can turn on the camera by briefly pressing the camera [ON/OFF] button
(setting at the time of purchase).
[Power Save Mode]
■
[Auto Power Off]
The camera is automatically turned off if the camera has not been used for the time
selected on the setting.
(Selecting the [OFF] setting may increase the power consumption of the camera.)
• When you want to use the camera again, turn the camera back on.
■
[Auto Power Off(Wi-Fi)]
The camera is automatically turned off if the camera has not been used for approx.
15 minutes with no Wi-Fi connection. (Selecting the [OFF] setting may increase the power
consumption of the camera.)
• When you want to use the camera again, turn the camera back on.
■
[Auto Monitor Off]
The monitor is automatically turned off if the camera has not been used for the time
selected on the setting.
• To turn the monitor on again, press any button.
●
This function is not available in the following cases:
• During motion picture recording/playback
• When recording with [
] ([4K Pre-Burst]) of the 4K Photo function
• When connected to computer
• During Slide Shows
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
• While the HDMI output is being used for recording.
To Next Page
Loading...
