196
Using Menu Functions
Menu list
■
To set daylight savings
Press
in step
2
. (Press again to release the setting)
• When daylight savings [ ] is set, the current time is advanced by 1 hour. If the setting is
canceled, the time automatically returns to the current time.
■
When you come back from your travel destination
Select [Home] in step
1
and press [MENU/SET].
●
Time zones may be revised depending on the country or area, so the place name displayed on the
screen may not match the actual time zone. Please also refer to the time difference displayed at
the bottom of the screen before setting.
[Travel Date]
■
[Travel Setup]
If you set your travel schedule and record pictures, the day of your trip on which the
picture was taken will be recorded.
■
To record [Location]
Once the [Travel Setup] is set, you can set the location.
• For details on how to enter characters, refer to “Entering Text” (→52)
●
To print [Location] or the number of days that have passed, either use [Text Stamp] (→217) or
print using the “PHOTOfunSTUDIO” software.
●
The travel date is calculated from the set departure date and the date set in the camera’s clock.
When destination is set in [World Time], days elapsed are calculated based on local destination
time.
●
When [Travel Setup] is set to [OFF], the number of days elapsed is not recorded. It is not
displayed even if [Travel Setup] is set to [SET] after recording.
●
When the current date passes the return date, [Travel Setup] is automatically canceled.
●
[Location] cannot be recorded while recording motion pictures, recording 4K photos, or recording
in [Post Focus].
[Wi-Fi
®
]
■
[Wi-Fi Function] (→246)
■
[Wi-Fi Setup] (→248)
→ [Setup]
To Next Page
Loading...
