200
Using Menu Functions
Menu list
[Monitor Luminance]
Sets the monitor brightness according to the ambient light level.
(Auto)
During recording, the brightness is adjusted automatically according to how
bright it is around the camera.
During playback, the brightness is the same as when you last recorded.
(If you have not recorded once since turning on the camera, a standard
brightness is used.)
(Mode 1) The brightness is increased.
(Mode 2) The brightness is standard.
(Mode 3) The brightness is decreased.
●
Some subjects may look different from their actual appearance, but the recorded picture will not
be affected.
●
Setting [ ] or [ ] reduces the operating time.
[m/ft]
*
Select how distance is displayed, in Ft or M.
*
Depending on the country or area where the camera was purchased, this is not
displayed due to differences in specifications.
→ [Setup]
To Next Page
Loading...
