Preparation
- 22 -
Select [Clock Set] in the [Rec] or [Setup] menu. (P48)
•
It can be changed in steps 5 and 6 to set the clock.
• The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Note
•
If the clock is not set, the correct date cannot be printed when you order a photo studio to print
the picture, or when you stamp the date on the pictures with [Date Stamp] or [Text Stamp].
• If the clock is set, the correct date can be printed even if the date is not displayed on the screen
of the camera.
Changing the Clock Setting
DMC-3D1PDF-VQT3U43_mst.book 22 ページ ２０１１年１０月２４日 月曜日 午後１時９分
To Next Page
Loading...
