EasyManua.ls Logo

Panasonic Lumix DMC-3D1 - Page 59

Panasonic Lumix DMC-3D1
163 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 59 -
Basic
Use a battery with sufficient battery power when formatting. Do not turn the camera off during
formatting.
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
If the card has been formatted on a PC or other equipment, format it on the camera again.
It may take longer to format the built-in memory than the card.
If the card cannot be formatted, please try another card before contacting your nearest Service
Center.
Calibration is not done if correct position is not touched. Touch the [i] mark again.
During the adjustment, fix the camera so that it does not move.
Make these adjustments if the unit has been dropped or otherwise subjected to a sharp impact,
or if you feel strange or uncomfortable when viewing the recorded 3D images.
Selecting subjects that are bright, with minimal movement and featuring many different shapes
makes adjustment easier.
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[Format]
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
[Calibration]
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1 Touch [Start].
2 Touch the orange [r] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
A message is displayed once the
position is set.
3 Touch [End] to finish.
[Auto 3D Adjustment]
The disparity (image shift) during 3D recording is corrected
automatically by the camera.
1 Touch [OK].
[OK] is displayed only when the bar
displayed on the left of the screen
exceeds [ ].
2 Touch [End] to finish.
[Language] Set the language displayed on the screen.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
DMC-3D1PDF-VQT3U43_mst.book 59 ページ 2011年10月24日 月曜日 午後1時9分

Table of Contents

Other manuals for Panasonic Lumix DMC-3D1

Related product manuals