Preparation
17
(ENG) SQT0433
∫ About the motion picture recording and SD speed class
∫ Inserting/Removing the microSD card
1
Open the card slot cover, ensure that the connection terminal of the microSD card
is facing down, and insert it firmly in the correct direction until it makes a “click”
sound.
A Do not touch the connection terminals of the microSD card.
≥ To remove, push in the card until it makes a “click” sound and then pull it out straight.
2 Close the card slot cover.
According to the [Rec Quality] (P36) of a motion picture, the required microSD card
differs. Use a microSD card that meets the following rating of the SD Speed Class.
≥ SD Speed Class is the speed standard regarding continuous writing. Check via the
label on the microSD card, etc.
≥ The SD speed class represents the level of performance of microSD cards. The SD
speed class does not serve as a guarantee of performance for all operations.
[Rec Quality] SD Speed class Label example
FHD/HD/VGA/1:1 Class 4 or higher
4K Class 10
≥ The data on the built-in memory or the microSD card may be damaged or lost due to
electromagnetic waves, static electricity or breakdown of this unit or the microSD card.
We recommend storing important data on a PC etc.
≥ Keep the microSD Card out of reach of children to prevent swallowing.
DMC-CM1P-SQT0433_eng.book 17 ページ ２０１５年４月１３日 月曜日 午後１時１分
To Next Page
Loading...
