Panasonic Lumix DMC-CM1 - Connecting to Networks; Connecting to Mobile Networks

Connecting to networks
27
(ENG) SQT0433
Connecting to mobile networks
2G/3G/LTE networks can be used to access email, messages and the internet.
For most mobile network operators, the connection is configured automatically
when a microSIM card is inserted.
If the connection is not configured automatically, an access point must be
configured manually.
Check with the mobile network operator with whom you signed the network
contract for the information required when setting the access points.
1
From the Home screen > [ ] > [ ].
2
[More...] > [Mobile networks] > [Access Point Names] >
[].
3
[Name] > enter the name for the new settings > [OK].
4
[APN] > enter the access point name > [OK].
5
Enter other information as required.
≥ The details to enter differ depending on your mobile network operator.
6
[] > [Save].
1
From the Home screen > [ ] > [ ].
2
[More...] > [Mobile networks] > [Access Point Names].
≥ If multiple access points are configured, the currently connected access point will be
indicated.
Configure access point
Check the current access point
DMC-CM1P-SQT0433_eng.book 27 ページ ２０１５年４月１３日 月曜日 午後１時１分