Camera
35
(ENG) SQT0433
∫ [Quality]
Set the compression rate at which the pictures are to be stored.
∫ [AF Mode]
This allows the focusing method that suits the positions and number of the subjects to be
selected.
∫ [Metering Mode]
Type of optical measurement to measure brightness can be changed.
[A] ([Fine]) A JPEG image in which image quality was given priority.
[›] ([Standard]) A standard image quality JPEG image.
[]
([RAW
i
Fine])
You can record a RAW image and a JPEG image ([A])
simultaneously.
[] You can only record RAW images.
[š]
([Face
Detection])
The unit automatically detects the person’s face. (max.
15 areas)
[]
([AF
Tracking])
Focus can be adjusted to a specified subject.
[]([23-Area]) Up to 23 points for each AF area can be focused.
[Ø] ([1-Area])
The unit focuses on the subject in the AF area on the
center of the screen.
[]
([Multi
Metering])
This is the method in which the unit measures the most
suitable exposure by judging the allocation of brightness on
the whole screen automatically.
Usually, we recommend using this method.
[]
([Center
Weighted])
This is the method used to focus on the subject on the
center of the screen and measure the whole screen evenly.
[]([Spot])
This is the method to measure the subject in the spot
metering target.
DMC-CM1P-SQT0433_eng.book 35 ページ ２０１５年４月１３日 月曜日 午後１時１分
To Next Page
Loading...
