4. Camera
100
Applicable modes:
1
From the Recording screen > [ ] > [Rec] > [Drive Mode] > [Self
Timer]. (P91)
2
Select the time of the Self-timer.
3
Press the shutter button halfway to focus and
then press it fully to take the picture.
≥ Focus and exposure will be set when the shutter button is
pressed halfway.
Taking Pictures with the Self-timer
[] ([2sec.])
Picture is taken 2 seconds after shutter is pressed.
≥ This is convenient for preventing camera shake when the shutter
button is pressed e.g. when recording with this unit fixed.
[] ([10sec.]) Picture is taken 10 seconds after shutter is pressed.
≥ We recommend that you fix the unit when using the Self-timer for recording.
≥ Self-timer is disabled in the following case.
– When recording motion pictures
To Next Page
Loading...
